In addition to our custom amps, we offer several services to the discriminating player. We've listed some of them below. Contact us if you have something in mind not listed on this page.
PCB -> Hand-Wired
We can gut PCB (Printed Circuit Board) amps and turn them into hand-wired boutique amps. In other words, install the components the manufacturer should have used, but didn't in order to undercut the competition's manufacturing costs and/or mass produce their product.
Amp Repair & Restoration
Cap Jobs, Bias Work, Resurrections & more
We can fix it! We do cap jobs, bias work for new tubes, and resurrections on amps that have died. We have brought several old amps back from the dead and can do the same for you. We can restore previously modded vintage amps back to their vintage specs. We also don't endorse people who mod vintage amps unless they are doing so only to repair it.
Kit Building
You buy it, We build it
Have an amp you are GASing to own, but can't afford the real thing? Now you can own your very own clone! If you would like to buy a kit, but are not comfortable with the risks of building it yourself, send it to us (or have it drop-shipped) and we will do it for you at a very reasonable cost. We build all kinds of amps and can surely figure yours into the equation. We will deliver the same guaranteed build quality found in our own custom amps. See the links page for a few suggestions for where to get a good kit. Most kit builds will cost about $400-500. A rough estimate is 10-12 hours of build and test time.
Hot Rodding & Tone Shaping
We design and build custom amps and use that knowledge to modify existing amps to improve/change their tone and/or add more gain (or decrease it if that's your thing). If you have an amp you would like to mod, we can probably do it. Just don't ask us to mod a vintage amp. We frown upon that sort of activity. If really need a "hot-rodded amp" please consider selling your vintage amp intact, and having the exact amp you want custom built by us (or by one of our many competitors). The collectors will thank you!
Custom Head Cabinets
Have a new amp build but don't have a cabinet (head case) to put it in? Send us your requirements and measurements and we can custom build you a standard or a "one-of-a-kind" cabinet. There are many different colors of tolex to choose from, as well as hardware, baffle materials, etc.
Pricing and Shipping terms
Service/mod/repair work is $40 per hour with a 1/2 hour minimum. Most service work only takes 1-2 hours. Custom build work is billed at the same rate. Please do not ask us to rush our work to cut costs! Both safety and reliability are huge factors for us... and should be for you too!
Thanks for visiting Granger Amplification here on MySpace. We're a small company located in Birmingham Alabama, and we're dedicated to delivering custom products that inspire you to play and make it easy (and affordable) to get the legendary tones you've always wished you could own.
This page has been developed to help maintain a personal relationship with guitar players and the music community in general. We love to read your comments and messages about our products. For technical inquiries, please visit us at our official website, www.GrangerAmp.com
Granger Amplification - We're a one stop shop for all your amplifier needs. Browse though the photos for examples of our work, and the products and services we offer.
Jensen Musical Instrument Speakers is pleased to announce the latest addition to the Jensen Jet series, the 10” Tornado, sister to the 12” Tornado, a modern speaker offering defined and eloquent tone.
Who says great things don’t come in small packages? The 10” Tornado packs as much punch as the 12” with each tight and well defined note. The Tornado produces crystal clear, clean tones while still maintaining cream-like warmth.
The 10” Jensen Tornado generates a 100-watt whirlwind of power using a neodymium magnet. The advantage of neodymium is its light weight (half the weight of ceramic speaker magnets) and a more natural reaction to a player’s style than ceramic magnet speakers.
The Jet series speakers are designed to fill the gap in the current speaker market. The 10” Tornado was requested by musicians so that players can achieve the same power and tone in a 10” speaker as they enjoy with its 12” Tornado brother.
Hey Blues musicians & music lovers. There is a new forum just created for the Central & North Alabama blues scene called "Blues Stew". Check it out and sign up as a member today!!!
Hi everybody, just here to say a big thanks for all your support. The new workshop is well and truly up and running and the custom cabs are now available to order. All the best, Stevie Flynn.
HEY MAN...here lately i've been playing through that fender amp you worked over more than any thing...something heated those fender tubes up and it sounds probably brand new all of the sudden...It's so old that I do not remember just what it sounded like back then other than the tone was always great imho...About a month ago I left it on a few hours then grabbed my axe that was hooked up to it and thought WTF???...the thing screamed at me...I had to turn it down :S,unbelievable..MUCH APPRECIATED...OH...I stuck that Granger Amp poster on my page...It is cool...It would be great if you could get those in some music shops etc...Yeah...tricky biz+ there I know...well...actually i dunno wtf those pll are really thinking...i do know it's tricky LOL...
PCB -> Hand-Wired
Online Now!
